WTB IDF intake

[tigeravg]

Gonna give it a try. Will purchase new Weber IDF 40's if someone can come up with a dual IDF intake for my '74 X.

 

[kmead]

There is one on EBay right now FYI.

http://www.ebay.com/itm/FIAT-128-RA...479784?hash=item3f7fa54f28:g:f7YAAOSw3utY6USH

I would expect you will need to adjust the angle for an X, there is plenty of meat at the base mounting to shave it down to the correct angle.

 

[carl]

Since he says it fits 128s and Xs, it might be one of those split angle manifolds. It should be noted that IDFs on 124s sit at a slight angle outward.

 

[kmoses]

Would this work on a X1/9?
http://www.fiatspider.com/f15/viewtopic.php?f=11&t=35568

 

[tigeravg]

There is one on EBay right now FYI.

http://www.ebay.com/itm/FIAT-128-RA...479784?hash=item3f7fa54f28:g:f7YAAOSw3utY6USH

I would expect you will need to adjust the angle for an X, there is plenty of meat at the base mounting to shave it down to the correct angle.

Thanks, I have access to a good machinest and that mod shouldn't be a problem.

 

[carl]

Would this work on a X1/9?
http://www.fiatspider.com/f15/viewtopic.php?f=11&t=35568

No it won't work on a SOHC motor, the mounting holes and coolant passages are not the same. This is basically the same pattern as a 124 spider.

 

[kmoses]

Sorry, I thought the X1/9 was also a TC engine.

 

[Dr.Jeff]

Just for interest sake, thought I'd share a photo I happened across on line. It was from an old European classified ad, listed as fitting "Fiat 128 and Yugo".

 

[fiatfactory]

one specific for X19

http://www.ebay.com.au/itm/Fiat-X-1...DF-Weber-Vergaser-oder-Dellorto-/401015290498

no connection to seller etc etc

SteveC