View attachment 15214 Are these pistons worth anything? High compression I think? They have 86-4 stamped on a them
These protrude up in a triangular dome though? Aren’t the std pistons flat? They are definitely different from the 1500 pistons we removed from our 79’s block86.4mm is the STD bore for a 1500, & with those big valve reliefs these may be just that - STD 1500 pistons fitted to an overbored 1300 block.
These protrude up in a triangular dome though? Aren’t the std pistons flat? They are definitely different from the 1500 pistons we removed from our 79’s block
Maybe you guys need bigger monitors. I can clearly see that they are pop-up pistons. Look at the shadow being cast by the "wedge".
The cam box is shaved and the cam is some sort of regrind with the word special stamped on one end so who knows?Hard to tell, are they pop up Pistons? 86.4 would be larger than the stock 86mm for a 1300 block.
So you have Abarth Valve springs and now this? Have you pulled the Cam yet? Looks like this was definetly an engine with some performance work done.
Already have our 1500 bored to 87mm with new pistons, and the euro head we have is rebuilt with new valves, bronze guides and will have the ABARTH springs installed as soon as we have time. I read Steve C's SOHC article and sourced a euro cam, euro intake and rebuilt a 34 DATR carb too so I'm hoping someone can use all the 1300 stuff. What I'd really like to do is trade it all for some black interior items he needs for his 79If you have a 1500 block with std bores in good shape you may be able to swap these pistons in? Of course you wouldn't need the Euro head to increase compression then, you could just freshen up the 1300 head and use that. It looks like someone did quite a bit of work to that 1300. (Still would rather have a 1500 with a similar amount of work.) But...if you used those pistons you might end up with too much compression for pump gas?
No sorry, someone already claimed themI know this is an old-ish post but do you still have the pistons?