box engine mount

  1. Agnelli

    Torque suppressor

    Installed. Modified Eurosport gearbox mount exhaust support kit (shortened) with heim link.
  2. Eastep

    Dog Bone mount options

    Hello, everyone. I'm looking for opinions on the current offerings of dog bone mounts, for our cars. MWB VICKS Other. Example: Chevy chassis bushings pressed into bone mount, or bicycle shock, etc.. My mount is pretty well roached. So its time to explore my options. Thanks
  3. Mike C

    Side Motor Mount Blues

    Wow! I woke up this morning ready to change my side motor mount on my ‘78 X1/9 with a 1500CC and I’m lost!! I can remove the main bolt no problem, but how in the heck to you get to the remaining three??? The alternator belt and water pump look like they are in the way. Do I need to remove...
  4. Dr.Jeff

    "Dog-bone" [engine torque strut] rebuild...updated with new content

    I know this has been addressed a few times in the past, but I did not find any documentation of the procedure nor photos of the results (I apologize if someone else has documented this already). So I'll add what I did here: Prior posts have suggested a few alternatives for replacement bushings...
  5. Janis

    Engine snail mount bush alternative

    Deep in garage boxes found BMW e36 front suspension arm bush. Fits exactly into snail mount (~4mm thinner). Centre cylinder have to be used from old X19 bush. It fits too good, so I put a thin layer of wd40 can between bush and centre cylinder. In link part nr6...
  6. lookforjoe

    Torque Mount / Dog Bone

    I've gone through two dog bones from Vicks in a year or so - not many miles, and the bushings have torn the same way both times. I had modified a stock mount previously with a Volvo torque mount bush (with the open slots like stock) but the bushes were already worn when I put them in. So, I...
  7. D

    Valve Adjustment, Part Two-A

    [Continued from Valve Adjustment, Part One http://xwebforums.com/forum/index.php?threads/25490/ ] In Part One we removed the cam top cover, measured our existing clearances, and recorded them. Now we are ready to remove and measure our shims. The new forum software allows 10 pics per post...
Back
Top