box windows

I'm taking a brake from the brakes to address my power windows. Right hand side works, left does not. I took a meter to the circuit and I'm getting power all the way to where the black and white wires connect to the motor (picture below). It's a 1986. I've read threads where sometimes the...

Overwhelmed at the task of trying to figure out where the cable needs to run in a dark, space with little room to move without loosing skin on hands. Anyone had the same problem in getting window to run smoothly up and down. New runners, some lubricant. Haynes workshop manual not much help...

I need to replace driver side wind wing glass with attached side mirror. is it possible to remove one from a donor car...if so how? i got sideswiped..got mirror..took out that triangular window. thanks

Ok, so I spring for Al C's FAZA book, had one when I was a teenager, and stumbled across hidden in some engine build text, a "secret" wire embedded during original windshield install ?????????? Al mentioned, Bertone installed a wire surrounding the windshield, when found, could be energized...

Based on the schematic provided by Bob Brown, I installed relays in the power window circuit on my '86. First for reference, here's Bob's schematic: Here's what the final product looks like on the passenger (R) side: Annotated pic of passenger side: And on the driver (L) side...

Both of my cars windows go up "too far"? I have to leave them cracked so they don't hit the weather seal on the targa top when I shut the door. Its been suggested that I adjust the window mechanism to not let it go up so far. Doesn't seem right to me. Am I missing something here?

What takes forever and sometimes needs a little help to reach the top? The power windows on most X1/9s. I thought this was a problem I needed to live with until yesterday. After installing a little wiring harness with 4 relays, my windows are now the fastest in the East. DCFiats Annual Tech...

Anyone have experience replacing the vent glass? (since it doesn't vent, I'm calling it a quarterlight) I'm working towards doing the passenger mirror through the glass like the driver's side and I have the holed glass in frame but it's black and my '81 is still all chrome so I was wondering...

Someone had told me in another thread that there is a cam type thing somewhere that adjusts how high my window is allowed to go but I cannot find it.