dcnf

Long story short, I bought this car back having built it up 15 years ago. At the time I didnt have the funds for an AFR or rolling road tuning after I put the DCNF's on so I took a punt and left it at that. After the rust work and a scratch rewire it has an AFR and I would like to get the...

I have been having some issues running my engine with the 36 DCNVA carburetor. The engine is a very overwarmed 1300 with all the goodies in my signature. The car accelerates and drives fine expect when at light throttle, city cruising which is what I normally do around here. The car leans out to...

I'm looking at buying a set of 36 DCNF carburetors for my '75 X1/9. I had originally planned on going with 40's, but I'm of the thinking that without more modifications and a compression bump the 36's will be a better compromise. The engine is running a stock 1500cc engine with a slightly ported...

4 Sport air cleaners for WEBER DCNF and a 19.25 inch test pipe. AIR CLEANERS have bases cut to fit Weber DCNF. - Sprint cleaner is 45mm, Stainless Steel top and has water washable plastic gauze filter, with clips. $50 - One is 55mm with clips and new Bayless filter. pitted plating $45 -...

Guys need advices, infos or photos on connectiong linkages for twin DCNFs for X/128. I find person who is able to made linakges, we made some basic design which will work to connect carburetors together but we want still to add place for throttle linkage/cable ball? If someone can post photos...

I recently got my engine running after full rebuild. The main components are in my signature and below: 1500 Euro head (no decomp ring) head port and polished per SteveC Ultimate SOHC 37.5mm intake valves (33 exhaust, stock for 1500s) 87mm bore Alquati 40/80 cam 8551 Mondial pistons w/ extra...

I am working on the air intake and evap system set up for my new DCVNA carb. I have a few questions: 1. Can the activated carbon trap be ran with DCNF/DCNVA carbs? I would like to keep the setup if at all possible. I do not see any ports on the carb above and below the throttle as required by...

I feel like I’m making this forum all about me... I’ve got another problem. The head I’m using 4444407 is a 12 bolt 1500 head but doesn’t have a vacuum port. I am using a vacuum advance Ducellier distributor. Where can I pull the vacuum? Also I purchased the 36 DCNVA carb from Steve. Haven’t...

Aside from having to hack the trunk firewall, any huge differences between the prformance/tuning of these two carb set-ups. Need some input. Thanks ahead of time.