headlight relay

  1. kmead

    Low Beam Headlight Relay Mod for late fuse box X1/9 85-88

    This is a tutorial to improve low beam light output and reduce the load on the light switch, column switch and the ignition switch by adding a relay to supply power to fuses 3 and 4 with minimal wiring changes or additions. This modification will compliment the existing high beam relay which...
  2. JimD

    Inexpensive headlight relay kit from Amazon

    I have been working my way through upgrading the lighting on my 85X. This past week I installed LEDs in the tail lights, front and rear turn signals and reverse lights. I put the proper LED flasher in the relay tray. Somehow, I forgot to order the marker LEDs and license plate LEDs. I will get...
  3. Larry

    Headlight relay - installed, but no lower beam driver's side

    I finally installed the Bob Brown headlight relay kit I bought from him last century. I'm 99.999% sure I followed each step, but my driver's side low beam doesn't work. The driver's side high beam does as does the passenger side low and high beams. I tried the 9-volt battery test on the...
  4. AKimball92

    Headlight Relay Mod Wiki

    Xwebers, Please go check out the HLRM section of the wiki. I added an image of the 1978 OEM wiring diagram but modified with the changes made when doing the HLRM. I created the diagram last year when doing the mod myself. I just wanted to visualize it better than the written steps provided. I...
  5. Craig78

    Schematics for 1978 - X1/9 Headlight/Wiper Mods

    These are the schematics I made up from all the wonderful contributors on the XWeb and based on my mods for the year specific. Hope it helps someone! (4 full size pictures to follow) Here is the set up in my car This picture is entire set up. The next picture is focused in on the relays...
  6. J

    headlight relay question

    exactly what type of relay should I be looking to source? I got a pair of 12v 30a relays from Partsource that have plastic bodies and the mounting ears are plastic as well. The wiki instructions for performing the headlight relay state that the relays must be well grounded to the body, this is...
  7. bbrown

    Insertable headlight harness -Last build

    I'm completing my last build of my insertable headlight harnesses. Those of you who have a set of these know the result of installing them. I've just completed 8 sets and will build a few more in a few days, but when they're gone, they're gone. This is my last build. What they do: These allow...
Back
Top