pedalbox rebuild

  1. Rupunzell

    74' Pedal Box Project, Part 2

    Pedal box plumbing done, hoses attached, next step is to fill up the cylinders and persuade as much air that was in the hoses, tubing and cylinders out replacing air with fluid. Two 60cc syringes are use to fill the pedal box system with DOT 4 brake fluid and a test fitting with a brake fluid...
  2. Rupunzell

    Clutch Pedal Spring Install..

    These can be a real problem to install. https://www.youtube.com/watch?v=f-Tn90QAayc&list=UUwh_UaR9_fgy97tZynvKs-w Bernice
  3. Rupunzell

    74' Pedal Box Project

    Time to re-do the pedal box for the 74. OEM Fiat cylinders were sent to Karps Brake for sleeving in Stainless steel (304). At this point in time, I flat refuse to use the current afermarket replacement cylinders are they are not equal to Fiat OEM. This is the innards of the clutch master with...
Back
Top