weber

I have been having some issues running my engine with the 36 DCNVA carburetor. The engine is a very overwarmed 1300 with all the goodies in my signature. The car accelerates and drives fine expect when at light throttle, city cruising which is what I normally do around here. The car leans out to...

4 Sport air cleaners for WEBER DCNF and a 19.25 inch test pipe. AIR CLEANERS have bases cut to fit Weber DCNF. - Sprint cleaner is 45mm, Stainless Steel top and has water washable plastic gauze filter, with clips. $50 - One is 55mm with clips and new Bayless filter. pitted plating $45 -...

Used Crane autocross camshaft. F266 grind. 10.8mm lift. Base circle is 25.74mm. This is a 3/4 race trackday or autocross fitment. $60 New reground MWB camshaft and cam carrier set. 10.1mm lift. 223 degree duration. $290 Hot street cam. 1974 X 1/9 plastic front grill. Very good condition...

I have a 76 x1/9 and I'm looking for a good condition/recently rebuilt Weber 32 DATR. I already have one on my car that's due for a rebuild, so I'm not interested in ones that need to be rebuilt. Thanks!

The often complained "starts, runs, loses power" happened when we resurrected a 1980 X1/9. I didn't want to pull the carb off, so I pulled the top of the carb, soaked up the fuel in the bowls, pulled all the jets, and soaked them in carb cleaner. Then I sprayed carb cleaner down the empty jet...