wiper relay

These are the schematics I made up from all the wonderful contributors on the XWeb and based on my mods for the year specific. Hope it helps someone! (4 full size pictures to follow) Here is the set up in my car This picture is entire set up. The next picture is focused in on the relays...

Already done "Zonker's Mod" to Fuse A/1. Gauge reads from 10 to 16 V, normally in the center, 13 Volts +/-. Yesterday, I got caught out in the rain. #1 Put on Targa lid, Roll up windows and turn on FAN. Meter drops about a Volt. Raindrops on the windshield. Turn on wipers. Low barely...

Am replacing the thottle cable and because of my size have the center console out. Since it was removed I thought i would clean up some misc. elec problems . One the wiper motor pulls lots of amps and is slow. Found the thread http://xwebforums.com/forum/index.php?threads/21415/ great stuff...

I've searched for and found a number of posts demonstrating this mod but most of the links to a wiring diagram are not working. The most often referred-to link is missing: http://www.network54.com/Forum/12159/message/1131915234/Courtesy+of+... Anyone have a diagram available? This would be...

Using this thread as a guide I rigged up a plug & play wiper relay harness to try and speed up the wipers on the 131. Tomorrow I will pick up an inline fuse and see if it works.

Since my re-spray has gone from the estimated two weeks to nearly two months now, I'm running out of projects I can do at home. I like the idea of insertable relay wiring harnesses as recommended by Bob Brown. So I made one for my wipers. I pulled apart my wiper motor and assembly to clean...

Can someone help me. I had a 55 amp alternator on my car. I put a Camaro alternator on my car it puts out 105 amp. It makes my lights brighter and my system run a lot better. but my wipers still have this problem. Please watch this video I made . http://youtu.be/wSvhMeBLZ7w I tried a relay...

The Leiszig windshield wiper mod was the first mod I saw after joining XWeb about four years ago, and I immediately saved it as a Favorite. So now it comes time to implement it. I think this drawing is the final, I need to check and verify that: Taking a page from Bob Brown's book, I set...