. Audi derivation joints are also found on ebay Italy.
The sorajet ones have a tripod, the others are perhaps a little more modern and perhaps efficient.
This is the link
https://www.ebay.it/itm/223749901964 .
That is a very nice set up and pretty reasonable from a cost perspective.
Oriebi do you have any comment about the quality and which design is better or if there really is much difference between them?
Thank you for sharing, I may need to arrange a purchase and shipment.
Google translate from that Ebay listing:
PRE-ASSEMBLED KIT FOR FLEXIBLE COUPLINGS, BETTER THAN TRIPODS BUT AT A LOWER PRICE!
MODIFICATION FOR 126 ALL, 500 F L R, 600, 850
NO CHANGES TO THE AXLE AND WHEEL HUB ARE REQUIRED
REPLACES THE ORIGINAL JOINT
INCLUDING SPECIFIC FAT AND VITERIE (?)
THE BRAND OF GREASE MAY VARY DEPENDING ON AVAILABILITY
FASTENING WITH THE HEADBAND LOCKING CLAMP MAY DIFFER FROM PHOTOGRAPHY
Recommended for original engines, mandatory for elaborate engines!
REPLACEMENT OF THE ORIGINAL JOINT THAT IS DAMAGED EASILY, THE SLIDING JOINT WILL NOT BE USED BECAUSE THERE IS NO LONGER THE RUBBER WHICH STRESSS AXIAL, ESPECIALLY WITH ELABORATED ENGINES. THERE ARE NO MODIFICATIONS TO DO, BUT ONLY DISASSEMBLE THE OLD COUPLING, REMOVE THE SPACER RING AND INSTALL THE NEW COUPLING AFTER FILLING IT WITH GREASE. Reassemble the nut with the right tightening torque and lock it. REASSEMBLE THE AXLE SHAFTS.
OUR EXCLUSIVE PRODUCTION, MADE IN ITALY
AUDI DERIVATION
LIST PRICE € 250.00