81x
X'ing Fixing
A little progress.
I've disconnected the vacuum line, but at the far edge as the edge on the pressure regulator didn't came out easily. no scent or fuel trace where found.
Next test is with pressure gauge only?
For the CTS:
On the manual that @Dan Sarandrea (Phila) posted, it says to pull out the plug from the ECU.
Is that gigantic plug?
Just loosen those two bolts and pull out?
First time I'm doing it, want to be careful.
The sensor and wires seems complete
So dirty
BTW, those are the original clamps I refer to
But it those seems to be clamping a non pressure lines.
I've disconnected the vacuum line, but at the far edge as the edge on the pressure regulator didn't came out easily. no scent or fuel trace where found.
Next test is with pressure gauge only?
For the CTS:
On the manual that @Dan Sarandrea (Phila) posted, it says to pull out the plug from the ECU.
Is that gigantic plug?
Just loosen those two bolts and pull out?
First time I'm doing it, want to be careful.
The sensor and wires seems complete
So dirty
BTW, those are the original clamps I refer to
But it those seems to be clamping a non pressure lines.