Fiat Dallara wheels

[andreav]

I came across on Dallara wheels, need some infos if someone can help,width I have found that where 8 inches front amd 11 at rear, but I m looking still for offset (ET) info?
Also if someone knows where to find new barrels and lips?

 

[DanielForest]

There was a time when Di Fulvio racing was selling them in Italy. They seems NLA. Prices for the 13x8 was 320 euro... 12 years ago. You can take a look at www.difulvioracing.it

 

[andreav]

Thanks Daniel, I have contact them, they dont have anymore of this or infos where to find barrels and lips.

 

[Steve Hoelscher]

Most racing wheels are measure by backspace instead of offset. For a standandar X1/9 suspension and hub setup max backspace is about 4.5 inches.

 

[johnph]

If you need replacement barrels and have a sample (bent) of what you need, they can be made by Jongbloed Racing, Morgan Hill, California.
408 776 1380. They have fancy German machinery to roll aluminum rim halves.

 

[Steve Hoelscher]

If you need replacement barrels and have a sample (bent) of what you need, they can be made by Jongbloed Racing, Morgan Hill, California.
408 776 1380. They have fancy German machinery to roll aluminum rim halves.

I have known the guys at Jongbloed for years. Great people and they make very nice wheels.

 

[308slegs]

Awesome thread! Does anyone know the tire sizes used for the 8” and 11” wheels?

 

[johnph]

For a 900 to 1200 pound formula car or sports racer, you could use:
Avon brand,
9.0 x 20.0-13 for the 8" front wheels
13.0/23.0-13 for the 11" rear wheels
(the middle dimension is the tire overall diameter)

 

[308slegs]

For a 900 to 1200 pound formula car or sports racer, you could use:
Avon brand,
9.0 x 20.0-13 for the 8" front wheels
13.0/23.0-13 for the 11" rear wheels
(the middle dimension is the tire overall diameter)

Thank you so much for the info!

 

[Lowtechprime]

Bespoke Alloy Wheels in Modern and Classic Styles - 10" - 20" Made in the UK

Bespoke Alloy Wheels Modern and Classic Styles from the Best Bespoke Alloy Wheel Manufacturer in the UK. Over 50 styles 10" upto 20". Proudly made in the UK

www.imagewheels.co.uk

Force Racing - Classic Mini Parts & Titanium Components

What we do - Force Racing are the definitive solution to all your bespoke engineering needs. We specialise in made-to-order titanium reproductions and scratc..

www.force-racing.co.uk

Both of these might be a closer source for you in Europe... Both supply a wide array of rim sections.... I have dealt with both in the past

 

[cozzoi]

Matt Brannon has the complete info, ask him if not sure.

 

[Steve Hoelscher]

Awesome thread! Does anyone know the tire sizes used for the 8” and 11” wheels?

If you want a modern radial Hoosier makes a 225/45-13 and a 255/40-13 A7 DOT Competition Radial that would work for that wheel setup.

 

[308slegs]

If you want a modern radial Hoosier makes a 225/45-13 and a 255/40-13 A7 DOT Competition Radial that would work for that wheel setup.

Thank you Steve!