Identification help?

CnC79X19

CnC79X19

True Classic
What type of adjustable cam sprocket is this, will it fit both a 1500 and 1300 and secondly are the water tubes in a 1300 and 1500 the same? If not how can you tell the difference with no numbers present? I know someone who could use this stuff and would like to pass them along if they'll fit a 1500
 

Attachments

  • 20200704_043201.jpg
    20200704_043201.jpg
    412.9 KB · Views: 68
  • 20200703_204834.jpg
    20200703_204834.jpg
    304.2 KB · Views: 59
The timing marks are different since the 1500 uses the TDC mark at the top on the belt cover bracket and the 1300 uses the timing mark down on the engine mount bracket.
 
Here is a picture of an adjustable gear marked for a 1300 (left) compared to a stock 1500 gear. I took this picture years ago and did my best to align the key holes in the same orientation to show the opposite nature of the timing marks between the 1300 and 1500. Fortunately, your gear's key hole is oriented in the same direction. I would say that your gear is marked for a 1500.
vicks_pulleyb.JPG
 
Physically, the prestone tube could go in any x19, the difference is some tube have one or more opening on the side to accomodate other hoses.
 
carl said:
The timing marks are different since the 1500 uses the TDC mark at the top on the belt cover bracket and the 1300 uses the timing mark down on the engine mount bracket.
Click to expand...
carl said:
The timing marks are different since the 1500 uses the TDC mark at the top on the belt cover bracket and the 1300 uses the timing mark down on the engine mount bracket.
Click to expand...
This one has a blue dot on one side and a red dot on the opposite Carl. Have another look at the gear in the picture with the tube in it. Try to expand it if you can. I was hoping it would work for you? Does the tube look correct though?
 
CnC79X19 said:
What type of adjustable cam sprocket is this, will it fit both a 1500 and 1300 and secondly are the water tubes in a 1300 and 1500 the same? If not how can you tell the difference with no numbers present? I know someone who could use this stuff and would like to pass them along if they'll fit a 1500
Click to expand...
I ordered that from Millers Mule, it's a modified Fiat pulley.
 
ET74 said:
I ordered that from Millers Mule, it's a modified Fiat pulley.
Click to expand...
Hey Erk, nice to hear from you. Carl's looking for one for his 1500 build so still trying to create good karma here and I was hoping this one would help him out? Will it only fit the 1300 or 1500 too?
 
CnC79X19 said:
Hey Erk, nice to hear from you. Carl's looking for one for his 1500 build so still trying to create good karma here and I was hoping this one would help him out? Will it only fit the 1300 or 1500 too?
Click to expand...
I didn't notice the blue dot earlier. It appears to be marked for both 1300 and 1500. It should work for either engine.
 
CnC79X19 said:
Hey Erk, nice to hear from you. Carl's looking for one for his 1500 build so still trying to create good karma here and I was hoping this one would help him out? Will it only fit the 1300 or 1500 too?
Click to expand...
I believe it work's on both but I would check the instruction's. It should be a single page somewhere in all the stuff you got. Hth
Erk
 
You must log in or register to reply here.
Back
Top