Light switch

htfx19

Herzel Frenkel
I found the culprit in the light circuit - a bad contact.
I cleaned the switch and it works intermittently. One of the wire contacts is bad and it appears [FONT=&quot]brownish [/FONT]too.
Now, the question is - how do I remove a wire out of the connector?
I guess I have to push something and pull on another, it didn't work.
Any explicit help, and thanks.
 
Removing terminals...

If you look at the face of the connector block that goes toward the switch, the re is a little additional slot; part of each slot. You need to insert a jeweler's screwdriver (or the official tool if you have one) and bend the retaining tab back toward the wire connector. Once done the connector slide right out of the block. Hope this helps.
 
Back
Top