Whilst trying to access the non-operative heater fan/blower switch on a late 1500cc car I noticed why the cold air (ie lowest) slider was so easy to move: it was not connected to the Bowden cable that operates a flap located somewhere else.
Can anyone tell me if the cable can be re-attached from the radio cavity and if so, how? As far as I can tell from feel alone, the slider's arm does not seem to have any fixing point for the inner cable, which itself has two 90 degree bends at its end.
I have tried to push up with finger pressure in case the cable can be hooked over the slider arm somehow but without success!
Thanks in advance
Now off to work out why I have no fan or brake lights.......seem to share a common fuse.......
RDS
Can anyone tell me if the cable can be re-attached from the radio cavity and if so, how? As far as I can tell from feel alone, the slider's arm does not seem to have any fixing point for the inner cable, which itself has two 90 degree bends at its end.
I have tried to push up with finger pressure in case the cable can be hooked over the slider arm somehow but without success!
Thanks in advance
Now off to work out why I have no fan or brake lights.......seem to share a common fuse.......
RDS