oil vapor separator

If you're talking about the spark arrestor in the hose that leads from the cyclonic oil trap, any solvent should do the trick. Just soak it and rinse it off with acetone or lacquer thinner. That goes for the trap itself, too. Just scrape away the gunk and let it soak for a bit than rinse it off.
 
If you're talking about the spark arrestor in the hose that leads from the cyclonic oil trap, any solvent should do the trick. Just soak it and rinse it off with acetone or lacquer thinner. That goes for the trap itself, too. Just scrape away the gunk and let it soak for a bit than rinse it off.
thanks im cleaning the cyclonic oil trap the arrestor is new
 
Back
Top