Putting the crank back in 1979 x19 Fiat

[derikdol]

What is the order of saddle bearing positions from front to back when putting the crank back in? As well as torque specs? I noticed there is notches in 4 of the saddles is that 1,2,3,4? If so which one would be number 5? The one with no notches?

Thanks for your help

 

[bmck]

0,4,3,2,1 from flywheel end to timing belt end.

Also, you should note the 3-notch cap is a little wider than its neighbours (it carries wider bearing shells) so could only go in the centre spot (between cylinders 2 and 3).

See http://www.xwebforums.com/forum/index.php?posts/97902&highlight=bearing+caps#post97902

Regards,

Brian