Turn Indicator Staying On

Warrenpeace1970

Daily Driver
Hi guys...

Been working on my 1980 X1/9, and finishing up some long-needed projects. Brown Wire Conversion, Headlight Relay bypass as well the same for the wiper motor.

In the process, I also found that my inside turn indicator comes on with the ignition, and stays on, even with the hazard lights or turn signals turned on. I converted my flasher to a newer electronic flasher, and cleaned up my connections at all 4 corners of the car, and it's still on. I have checked all of the connections on the back of the dash cluster and changed the indicator bulb and bulb-holder.

Any suggestions would be appreciated!

Warren
20200425_114742.jpg
 
There are different variations of electronic flashers. There is a thread around here which covers another person’s travail with this. I will see if I can find it.

I don’t know if the one with a ground is the more appropriate one for the X.
 


Have a look at these, I believe they’ll have the information you seek.
 


Have a look at these, I believe they’ll have the information you seek.

Thanks for the info... I'll check those threads out.
 
Back
Top