LarryC
Curator of #10105275
Papa Tony generously loaned me his cam tool and while I am waiting for new shims I took the opportunity to use my amateurish drafting skills to record the specifications. I'm posting this in the hopes that someone with precision metal machining skills will make up a bunch and sell them to our vendors. Then we can all buy them! Looks simple enough. Flat metal stock about 1/4 inch or so (5mm), machined in the manner specified below. Go to it...somebody!
Incidentally the tool from Nor Cal mentioned a while ago is a no go. Much ticker, wrong curvature. NIce handle though.
Incidentally the tool from Nor Cal mentioned a while ago is a no go. Much ticker, wrong curvature. NIce handle though.