bpimm
Brian Pimm
Here is a bracket I threw together that's easy to build, you're welcome to copy it.
It's a piece of 1" bar stock .120" thick with a bracket of the same material. and 2 nuts welded in from the back.
The mounting bracket welds to the back and comes up over the top sticking out the front.
It mounts in the clamp bolt in the bumper mount I just spread it apart a bit and slid the bracket in.
The bracket is bent to follow the contour of the car and the license plate is as well, I notched the top of the plate a little to clear the bumper mount.
It's a piece of 1" bar stock .120" thick with a bracket of the same material. and 2 nuts welded in from the back.
The mounting bracket welds to the back and comes up over the top sticking out the front.
It mounts in the clamp bolt in the bumper mount I just spread it apart a bit and slid the bracket in.
The bracket is bent to follow the contour of the car and the license plate is as well, I notched the top of the plate a little to clear the bumper mount.