fiatmonkey
Tim Hoover
I scored a practically new abarth exhaust from my brothers crashed race car. Its just the muffler and tips back. Wondering if anyone has added an abarth exhaust to their 500? I have the 2012 pop so there is no rear diffuser.
Abarth exhaust on a 500 pop...?
- Thread starter fiatmonkey
- Start date
Check This Post
http://xwebforums.com/forum/index.php?threads/22725/
I just did it on my 500 Prima Edizione.
http://xwebforums.com/forum/index.php?threads/22725/
I just did it on my 500 Prima Edizione.
Last edited by a moderator:
fiatmonkey
Tim Hoover
Ah! I totally forgot about your post. Where did you get the rear bumper and diffuser ?
Thanks,
Tim
Thanks,
Tim
Dealership
All you need is the upper bumper fascia (about $260) and the lower bumper fascia (about $140). Have a good paint shop color match the upper, do some careful bending/resizing of the inlet for the muffler, and you're in business> Well it was a little harder than that and took about 6 hours, but it is so worth it!
Good luck,
Dave
All you need is the upper bumper fascia (about $260) and the lower bumper fascia (about $140). Have a good paint shop color match the upper, do some careful bending/resizing of the inlet for the muffler, and you're in business> Well it was a little harder than that and took about 6 hours, but it is so worth it!
Good luck,
Dave
fiatmonkey
Tim Hoover
I test fit the exhaust and other than a step pipe to get the 2" to fit the 2 1/4" pipe on the abarth muffler it looks like its a fit. I think that instead of doing the abarth bumper cover and diffuser, I will have the muffler tips modified to jet out under the stock bumper cover.