Jeff Stich
True Classic
#1. Now SOLD - Used original front radiator grille for all 1979-88 X1/9's. Good condition overall w/no cracks, bottom/center two mounting tabs are broken off but are included (can be glued/epoxied back into place). Also included are a few of the original mounting screws & plastic clips, as shown.
$65 + insured USPS shipping from 92860.
#2. Now SOLD - Used passenger-side door 1/4-vent glass assembly with hole for OEM through-the-glass type Vitaloni mirror for 1986-88 Bertone X1/9's, can also be retrofitted to earlier X1/9's to allow use of the late-style mirror. Glass has factory green-blue tint. Includes the triangular black plastic front corner trim piece & the outer rubber seal strip, as shown.
$45 + insured USPS shipping from 92860.
#3. Now SOLD - Late-model Bertone X1/9 targa-bar vent "b BERTONE" alloy emblems/plastic grilles. Set of 3 grilles (2 driver-side & 1 passenger-side), 4 emblems & 4 of the tiny mounting screws. Used condition with some paint overspray, as shown.
$15/all + USPS shipping from 92860.
#4. Now SOLD - Rear decklid metal spoiler/wing, originally fitted to the 1986-88 Bertone models. Good overall condition, some scratches & needs repainting, missing the original end caps/extensions (the ends are currently filled with shaped bondo, done by a previous owner).
$50 + USPS shipping from 92860.
#5. Now SOLD - Very good used 14-bolt type cylinder head for all '86-'88 Bertone X1/9 1500 FI engines. Comes with all valves/springs/etc., all 14 head bolts/washers, all cam-housing/thermo-housing/exhaust mounting bolts/nuts/washers & the 2 brass sensor units, as shown. The Fiat casting number on this head is 7579480.
$125 + insured USPS Parcel Post shipping from 92860.
#6. Now SOLD - Black anodized alloy door threshold trim strips with engraved white "BERTONE" script. These mount on top of each door opening threshold (on top of the inner rocker panel), and help hold down the outer edge of the interior carpeting. The black anodized finish is worn/scratched in a few spots on the driver-side trim strip, less so on the passenger-side. Includes all but 1 of the mounting screws.
$50 + USPS shipping from 92860.
$65 + insured USPS shipping from 92860.
#2. Now SOLD - Used passenger-side door 1/4-vent glass assembly with hole for OEM through-the-glass type Vitaloni mirror for 1986-88 Bertone X1/9's, can also be retrofitted to earlier X1/9's to allow use of the late-style mirror. Glass has factory green-blue tint. Includes the triangular black plastic front corner trim piece & the outer rubber seal strip, as shown.
$45 + insured USPS shipping from 92860.
#3. Now SOLD - Late-model Bertone X1/9 targa-bar vent "b BERTONE" alloy emblems/plastic grilles. Set of 3 grilles (2 driver-side & 1 passenger-side), 4 emblems & 4 of the tiny mounting screws. Used condition with some paint overspray, as shown.
$15/all + USPS shipping from 92860.
#4. Now SOLD - Rear decklid metal spoiler/wing, originally fitted to the 1986-88 Bertone models. Good overall condition, some scratches & needs repainting, missing the original end caps/extensions (the ends are currently filled with shaped bondo, done by a previous owner).
$50 + USPS shipping from 92860.
#5. Now SOLD - Very good used 14-bolt type cylinder head for all '86-'88 Bertone X1/9 1500 FI engines. Comes with all valves/springs/etc., all 14 head bolts/washers, all cam-housing/thermo-housing/exhaust mounting bolts/nuts/washers & the 2 brass sensor units, as shown. The Fiat casting number on this head is 7579480.
$125 + insured USPS Parcel Post shipping from 92860.
#6. Now SOLD - Black anodized alloy door threshold trim strips with engraved white "BERTONE" script. These mount on top of each door opening threshold (on top of the inner rocker panel), and help hold down the outer edge of the interior carpeting. The black anodized finish is worn/scratched in a few spots on the driver-side trim strip, less so on the passenger-side. Includes all but 1 of the mounting screws.
$50 + USPS shipping from 92860.
Last edited:
