Grab bag sale, updated 05-11-2024

[Chris Obert]

I tossed a lot of the differential parts once I inspected them. If you have ever built differentials, it's amazing how worn parts can get before they fail. I ended up with three different kind of 124 cases, and a lot of common parts to clean. And even a very late 124 ring and pinion that I would use on my own car.
If I had a late 124 Pinninfarina Spider that needed a ring and pinion.
No matter, they are now put away with similar. And not on my web store. Not enough time for that.

Today I found a box full of lighting, which as you can see filled my table.


From the top.
124 head lamp buckets and gaskets. A 2000 Spider circuit board, it's broken in a spot and might help out on a board rebuild. 128 tail lamps, not sure of the many of the different versions it, or they, are. Some 131 tail lamps (think Rally). A variety of 2 liter 124 head lamp parts. A license plate assembly, common up to 1973. 124 & 131 license plate lamps. 124 Wagon tail lamp assemblies. 124 Spider tail lamp parts. A front lamp. A Lancia Beta Sedan tail lamp. A variety of side marker lamps. Some stuff I am (yet) unsure of, some interior lamps. a back up lamp assembly from about 1973 or so, a 128 front corner lamp.
Speak up if you want any of this.

 

[motoTrooper]

I tossed a lot of the differential parts once I inspected them. If you have ever built differentials, it's amazing how worn parts can get before they fail. I ended up with three different kind of 124 cases, and a lot of common parts to clean. And even a very late 124 ring and pinion that I would use on my own car.
If I had a late 124 Pinninfarina Spider that needed a ring and pinion.
No matter, they are now put away with similar. And not on my web store. Not enough time for that.

Today I found a box full of lighting, which as you can see filled my table.

View attachment 84451
From the top.
124 head lamp buckets and gaskets. A 2000 Spider circuit board, it's broken in a spot and might help out on a board rebuild. 128 tail lamps, not sure of the many of the different versions it, or they, are. Some 131 tail lamps (think Rally). A variety of 2 liter 124 head lamp parts. A license plate assembly, common up to 1973. 124 & 131 license plate lamps. 124 Wagon tail lamp assemblies. 124 Spider tail lamp parts. A front lamp. A Lancia Beta Sedan tail lamp. A variety of side marker lamps. Some stuff I am (yet) unsure of, some interior lamps. a back up lamp assembly from about 1973 or so, a 128 front corner lamp.
Speak up if you want any of this.

Hey Chris, I'm interested in the license plate assembly and maybe the 128 front corner lamp. Thanks

 

[Chris Obert]

Hey Chris, I'm interested in the license plate assembly and maybe the 128 front corner lamp. Thanks

Great!
Contact me directly with your shipping address and how you want to pay for it. If there is anything else you might want, I can add it to the shipment. And possibly save you $$$ on shipping costs.

 

[Chris Obert]

From previous posts where folks called dibs... I have gotten no further contact on the washer bag with motor, the license plate lamp assembly, and the 128 corner lamp.

Today's box had a lot of stuff in it. Some rare, some garbage, and a lot of hardware.


The green and yellow thing is a 500 N pressure plate, with bits already missing. Below that is the rubber seal for a 600 horn, a spring for an 850 motor mount, some 600 accelerator cables, and a control cable. A selection of cables, rods, a hand cable housing stop from a 103, unknown door window channel, the 124 accelerator bell crank I get asked for all of the time, an air pump flange, a USA 600 headlamp retainer, a 600 heater door clamp, a SOHC shifter clamp, some brake hard lines, a couple control wire, an old ignition wire with the Ferrari end for the spark plug, an 850 center spine cover, some bright covers for a Pininfarina 1200 or 1500, another choke cable housing end like Jeff Stich bought previously, a variety of 850 mounting rubber (buy new ones!), some seat belt brackets from a 1500 Cabriolet, speedometer bits, a fast idle control pod, a 103 road draft, 124 front bumper (?) rubber surrounds, a 2 liter seat belt bracket, some 124 spider top bits, a pedal pad an a 2 liter rear "ashtray", some door escutions from a Coupe, the blue thing is a FIAT shift knob, some seal control parts, a 1500 Cabriolet gasket under the fuse box, some 124 map pocket trims (I have new), window regulator rollers, a window stop, arm rest plug, a large post 2 liter sun visor mount, a door post catch, banjo bolt, hard line clips, wheel bearing covers and washers, another 850 leaf spring cover, pushrods, 13 rear axle nuts, a bumper inner bracket, a 600 fuel line (I get asked for these from originality freaks), a side marker gasket, a bag of black interior clips, a 2 liter battery retainer, some door plugs, some radio knobs, and an assortment of electrical things (one is a Pininfarina horn button part).

This stuff will take me the rest of the day to clear off the table.