ISO big valves and seats

[Jeff Stich]

Did you click the little European Union flag:no:

:doh:Well, I thought I'd clicked on both the USA & EU flags, must've clicked too fast & only hit the USA flag. :king: of the :dunce::dunce::dunce:!

 

[Jeff Stich]

Re: the Nissan (Datsun) intake valve

I might have some of the PBS (Nissan) o/s replacement valves. I know I have a box of assorted ex-PBS BVH parts in storage, just can't remember how many valves I have left. I'll check tomorrow.

Nope, don't have a full set, sorry. But I do know that the factory/OEM Nissan intake valve part number is 13201-A1100, available online fairly cheap:

http://www.group1autoparts.com/oem-...nder-head-and-valves/intake-valve/13201-a1100
http://www.everythingnissan.com/Nissan-Part-Number-13201-A1100-p/13201a1100-.htm
http://www.nissanpartszone.com/parts/nissan-valve-intake~13201-a1100.html
http://www.nissanpartsconnection.com/OEMParts/nissan-142/1/13201A1100.html

Or at Rockauto.com
1978 NISSAN 510 2.0L L4 : Engine : Intake Valve
ITM ENGINE COMPONENTS Part # RV9101 (Only 15 Remaining) $6.82

These valves will, of course, need to be modified like PBS did in order to work in a PBS BVH. :wink2:

 

[rjplenter]

Good tips Ulix

I would just add one note...

turn engine over

If there is any resistance to rotation, stop. Your valves may be contacting your pistons.

Cheers,

Rob

 

[Kevin Cozzo]

I was gonna say...

that had to be a lot of work, and a monster engine, but only for a race track. Thanks a lot for the info guys. maybe I'll get it running before I die, and actually make a Fiat event here in Texas