Maser wheels for the X
- Thread starter karhawk
- Start date
Beautiful!
Are these the 6" wide ones? Might be easier to fit than my 6.5" ones.
Still my favorite wheel for Italian cars.
Are these the 6" wide ones? Might be easier to fit than my 6.5" ones.
Still my favorite wheel for Italian cars.
ng_randolph
Bjorn H
I have seen these on a yellow X in in the south bay. It is a nice clean look that goes well with the car IMHO
Rupunzell
Bernice Loui
Did you know that was my 88'?
Yes, it does go well in more ways than one. The gray/alloy Maser wheels on Gregory's X is another very nice color combo.
Now my time is spent on making a nice 74'.
Bernice
Yes, it does go well in more ways than one. The gray/alloy Maser wheels on Gregory's X is another very nice color combo.
Now my time is spent on making a nice 74'.
Bernice
Black-Tooth
Tony Natoli
Doug, THE RATT, Lindeman had a set of these...
... on his '74 about 10 years ago...
Here's a foto just after Jeff Zucker bought the car from him...
(Twin carbs and custom exhaust with a big-valve head... I loved this car!)
... on his '74 about 10 years ago...
Here's a foto just after Jeff Zucker bought the car from him...
(Twin carbs and custom exhaust with a big-valve head... I loved this car!)
ng_randolph
Bjorn H
Did not realize it was yours. I walk by there every so often. Have not seen you car lately though.
Rupunzell
Bernice Loui
That 88' has a new owner and it will become a track day car to be built from the bare chassis up with a different drive train.
What you will see is my 74' in it's place. which is currently a rolling project.
Bernice
What you will see is my 74' in it's place. which is currently a rolling project.
Bernice
Black-Tooth
Tony Natoli
Well Tyrone... FIAT AMERICA meets...
... again on September 13th in Hayward... Go here for more info:
http://www.fiatamerica.com/index.htm
... but don't tell them I sent 'cha!
... again on September 13th in Hayward... Go here for more info:
http://www.fiatamerica.com/index.htm
... but don't tell them I sent 'cha!
gordon fogarty
Low Mileage
http://www.facebook.com/profile.php?id=832637523#!/photo.php?pid=6102025&id=832637523&ref=fbx_album
6 1/2 inch rims on my X1/9.
Had to modify offset by about 5mm
Gordon
6 1/2 inch rims on my X1/9.
Had to modify offset by about 5mm
Gordon
offset mod.. how?
How did you modify the offset? I managed to fit mine (also 6.5x14) with a little rear fender rolling.
How did you modify the offset? I managed to fit mine (also 6.5x14) with a little rear fender rolling.
karhawk
True Classic
haven't got there yet
The fronts are tight at full lock with 195-60's
I think we will go with race rubber, 185-60's in front and 205-55's in the rear
Kumho victoracer V700 tires shaved to 4/32"
Mayuko has been driving her spider for a year with some old V700's we got from Dave Voss and she likes them.
I don't car if they wear out quickly or not.
Chris
The fronts are tight at full lock with 195-60's
I think we will go with race rubber, 185-60's in front and 205-55's in the rear
Kumho victoracer V700 tires shaved to 4/32"
Mayuko has been driving her spider for a year with some old V700's we got from Dave Voss and she likes them.
I don't car if they wear out quickly or not.
Chris
gordon fogarty
Low Mileage
Took wheels to local engineering company and got them to machine 5mm off rear face. Just short of the steel inserts.
I run car without the orginal fiat spacers.
Car also runs with Leda coil-over race shocks.
I run car without the orginal fiat spacers.
Car also runs with Leda coil-over race shocks.