Need help with wheel mesurments etc..

[Xmember]

So Im looking at a set of wheels http://cgi.ebay.com/ebaymotors/ws/e...0358382618&viewitem=&sspagename=STRK:MEWAX:IT and spoke to the seller about having them made in a 4x98 patern. The seller said that the 35mm offset wont work for the car, as apparently the higher the offset ,the closer (to the hub) the wheel will be. While talking she mentioned that because of the custom sizing, it will take 2-4 months from the factory (no problem with me) but there needs to be a minimum of 5 sets sold, so unless 4 others wanna get a set of these, Im looking at buying 4x98 to 4x100 adapters and skipping all the head ache. My question is " what size offset and what size spacer/adapter will I need? " I'd like the wheel to be flush with the edge of the fender, or possibly exceed it by a 1/4 inch for a low/wide stance. BTW here are the specs listed
Model: ROTA SA RACING

Size: 15X6.5
Bolt pattern: 4X100
Offset: +40
Hub bore: 67.1

Color:BLACK WITH POLISH LIP

Condition: NEW in factory boxes
4 Caps included.

 

[racerx]

well

according to this wheel/tire calculator it will be close but you should be OK
http://www.rims-n-tires.com/info_specs.jsp

as long as you get this wheel adaptor

http://cgi.ebay.com/ebaymotors/WHEE...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories