Dan Sarandrea (Phila)
Waitin' On Parts...
**Still Needed** Wanted--Body Plug
Hey guys, I need a rubber body plug for the hole in the right rear wheelwell. (The left side uses an identical plug for the same spot on that side of the car.) The plug is small and thin enough so that you could just put it in a letter envelope and use one first class stamp.
By my measure, the plug is 2.361" long by 1.567" wide, or 60mm by 40mm for all you metric folks.
The hole it covers is the vertical oval hole in the wheel well, the one that opens into the rear crossmember. The hole is 1.9" long by 1.187" wide. Or 48.25mm by 30.16mm wide.
This hole is just a bit longer than the similar holes in the frunk floor, so a frunk floor plug is too small.
I noticed some plugs have their FIAT part number molded right into the plug----the FPN for this one is 4331241.
Here's a pic:
Hey guys, I need a rubber body plug for the hole in the right rear wheelwell. (The left side uses an identical plug for the same spot on that side of the car.) The plug is small and thin enough so that you could just put it in a letter envelope and use one first class stamp.
By my measure, the plug is 2.361" long by 1.567" wide, or 60mm by 40mm for all you metric folks.
The hole it covers is the vertical oval hole in the wheel well, the one that opens into the rear crossmember. The hole is 1.9" long by 1.187" wide. Or 48.25mm by 30.16mm wide.
This hole is just a bit longer than the similar holes in the frunk floor, so a frunk floor plug is too small.
I noticed some plugs have their FIAT part number molded right into the plug----the FPN for this one is 4331241.
Here's a pic:
Last edited:
