They cannot. They use different rods between the shifter lever and the linkage.I can measure mine, but I'm not certain if it is the same overall dimensions (maybe they can be interchanged?).
That round part is with rubber?
If it is I will buy new one.
Well I went out and took some measurements but I see it won't help you. As Eric has answered the question, the style I have will not fit in your car. Search on-line, there should be some European parts sources close to Latvia that have it at a better price.They use different rods between the shifter lever and the linkage.
I found it previously here
http://www.x19partsholland.nl/CATALOGUS/tabid/2470/ProdID/4371/CatID/643/language/en-US/Default.aspx
One of my friends sell parts with good discounts (70€ for new X19 windshield) but this OE part from him is 50€...
I found it previously here
http://www.x19partsholland.nl/CATALOGUS/tabid/2470/ProdID/4371/CatID/643/language/en-US/Default.aspx
One of my friends sell parts with good discounts (70€ for new X19 windshield) but this OE part from him is 50€...
View attachment 5358
Could someone please give me dimensions of this coupler?
It just costs too much for me to buy and ship to Latvia.
Maybe You can find fuel tank for x19 same way?https://www.fiat600ricambi.de/fiat600/Getriebe/VB1075
There you go: €6.50. Cross referencing the Fiat part number (4102856) did the trick!
Maybe You can find fuel tank for x19 same way?
One of those jerrycans that they carry around on the back of US army jeeps always looked like a good fit to me. Maybe you can find one in an army surplus store?
actually I already considered that, because I have few cans like that, but they are only 20l. I am going to cut of rusty bottom ~1/5 of my tank, weld a plate. And under it could locate oil radiator..