carl
True Classic
According to the factory wiring manual the heavier blue/black wire coming out of the white connector (goes to ignition switch) goes to the injector fan and the simiased smaller gauge blue/black wire goes to the charging light in the dash. A previous owner cut that wire and put a red crimp connector on it but only crimped at that wire so probably used as a closed end and the other exposed end has a male spade (which was covered in tape). First guess is those two ends were supposed to be connected to each other but why a factory spade terminal?
I'm not really ready to tackle the wiring in this car but this is kind of in my face.