pbs

BUNDLE IS NOW $2500 I sold my 76 X 1/9 and here are the parts still in my garage. All parts are clean and ready to assemble. I need the space. To finish the engine you will have to obtain a (preferably billet) camshaft and select a compression ratio to suit the cam. 1603cc 1500 X engine kit...

When icons pass from our hobby scene, which so many have in recent years, like Paul Swenson, Al Consentino, and John Edwards - to name just the more notable ones - my thoughts focus on taking stock of the hobby which we invest some much of our wealth and time in and perhaps wonder what the...

This is a stock Fiat 600/850 pressure relief valve. We know this type of relief valve are mounted in the blocks of Fiat 600/850. Abarth modified this valve to incorporate a longer spring to increase the oil pressure relief opening point, as the stock relief opening pressure was in the 50 psi...

Question: One can see that there is a bigger cylinder casting gap between the two middle most cylinder bores of 600/843/903/1050 blocks - so, which of the remaining cylinder "pairs" are being off-set bored to increase the casting gap between the remaining 2 front cylinders and then the two rear...

:help: I'm looking for reasonably priced larger valves for FI 1500.(39.5/36?).

Found I have a bent valve and would like to get a direct replacement. I believe it is a Nissan valve from a 240 or 260 but anyone's guess. One of those final stages of machining a 15deg back cut and "oh and by the way" deals.