14" Iron Cross Wheels - Value?

vespaholic

Daily Driver
My recently acquired 1979 X1/9 came with an extra set of Cromodora wheels.
5 1/2" X 14"
I'll never use them.
Can someone help me out with a value on these?
The car is wearing a set of Cromodora CD-30 wheels.
13" X 5.5"
I'll probably want to get rid of those as well.
A value on those would be helpful too.
I'd like to source a set of factory steel wheels, rings, center caps & lugs to put the car back to factory spec.
Thanks!

 

Attachments

  • IMG_1511.JPG
    IMG_1511.JPG
    221.9 KB · Views: 85
  • IMG_1510.JPG
    IMG_1510.JPG
    174.5 KB · Views: 83
  • IMG_1509.JPG
    IMG_1509.JPG
    164.3 KB · Views: 77
  • IMG_1508.JPG
    IMG_1508.JPG
    167 KB · Views: 84
Those 14" Cromodora wheels are pretty rare. They came on the 81 anniversary edition of the spider. Supposedly only 1000 cars were made.
 
Rare is good!!
What should I ask for them?
I also have the center caps and there are decent Yokahama tires mounted and balanced.
 
your best bet is to sell them locally. The tires, well might be useful to a local buyer but shipping used tires is very expensive.
 
My recently acquired 1979 X1/9 came with an extra set of Cromodora wheels.
5 1/2" X 14"
I'll never use them.
Can someone help me out with a value on these?
The car is wearing a set of Cromodora CD-30 wheels.
13" X 5.5"
I'll probably want to get rid of those as well.
A value on those would be helpful too.
I'd like to source a set of factory steel wheels, rings, center caps & lugs to put the car back to factory spec.
Thanks!

If you are going for originality, I can understand going back to the stock wheels. However, keep in mind that you will be adding a fair amount of unsprung weight to each wheel. My stock steel wheels and tires weigh considerably more than my alloy wheels and significantly wider 185-60/13 tires. The stock wheels are also narrower so that could limit tire options unless you are going for the stock size. Finally, and this is just a personal opinion, I think the 79 had about the ugliest stock wheels of them all. They look better in photos than up close.
 
CD 30s are one of the better wheels on an X looks wise, in my opinion.
 
The CD 30’s do look great!!
I agree.
I like the factory steel wheels as well.
That’s the good thing about wheels and tires.
20 minutes and they can be swapped.
Here are a couple pictures of my car.
 

Attachments

  • IMG_3959.jpeg
    IMG_3959.jpeg
    292.1 KB · Views: 87
  • IMG_3961.jpeg
    IMG_3961.jpeg
    267.2 KB · Views: 84
  • IMG_4027.jpeg
    IMG_4027.jpeg
    564.6 KB · Views: 94
Does anyone know the offset and/or back spacing of the wheels in my original post?
A potential buyer is asking.
I know i could measure them myself, but i broke both of my wrists and aside from a single finger to type with i can't do anything with my hands.
Thanks
 
I went to the way back machine and looked at Histowheels.

IMG_2295.jpeg
IMG_2294.jpeg

CD16s were used on some X’s, many 124s and late 131s known as Brava or Super Brava.
IMG_2296.jpegIMG_2297.jpeg
 
Last edited:
Back
Top