kmead
Old enough to know better
They can be added using an eyelet and held on with the battery clamp fastener. A good clamp wouldn’t use the butterfly nut to make those attachments.ok. 8’ of BW, just rolled up, going nowhere, just in case. As far as the additional wires coming off the relay, etc, those get added via screw-on, butterfly nut?
The 8’ of BW (which will be overkill but it is always easier to shorten a wire than lengthen it) will get used to run other relays or to bolster the ignition switch as you become more adept with electrical work
That clamp they threw on there isn’t helping.
The battery should be the type where the connections are towards the front of the battery in this installation (other plus and minus on the same ends of the battery just the opposite side, mirrored if you will).