the drain holes are in the base of the door, there is a black plastic and ruber strip that oscures them. The strip runs the length of the ase of the door.
I went to ckeck my stored 81 as I have removed the rubber seals to prevent rust.
Measuring from the front edge of the door, there should be 1/2 inch oval holes at 9inch / 19inch / and 30.5 inch .
These are oval and right near the lowest crease in the door. Good that I checked as there's a bit of rust on the very edge that needs attention.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.