Euro 1500 camshaft 4333059 $225obo

Discussion in 'FS&W Forum' started by Eastep, Nov 16, 2018.

  1. Eastep

    Eastep True Classic

    Location:
    PA
    Pulled from '87 and '88 UK cars. I purchased a couple of these as a package deal. $225 This is the highest lift variation of the OEM camshaft.
    24/68 64/28
    9.85 inlet 9.90 exhaust

    PayPal only
    TheAmishSasquatch@Gmail.com
     
    Last edited: Nov 21, 2019
  2. Karfrik

    Karfrik Albert

    Location:
    FtWorth Texas USA
    For 2 of them?...or just one??...thanks
     
    Dr.Jeff and Dino66 like this.
  3. Eastep

    Eastep True Classic

    Location:
    PA
  4. Eastep

    Eastep True Classic

    Location:
    PA
    C'mon guys and gals. This is the cam to install! No worries about small base circles, no worries of whether or not the cam was one of Al's defective cams, no removal of materials so the lobes don't bottom out, no worries cams turning into powder , no worries period! Not eBay junk 4358713 "Euro cam"
     
  5. Yves

    Yves True Classic

    Is that cam can work properly with a 1500 FI? or only with carburator ?
     
    Ryan59 likes this.
  6. Ryan59

    Ryan59 Daily Driver

    Location:
    Peck Kansas
    I’m in if this cam is compatable with FI.
     
  7. Eastep

    Eastep True Classic

    Location:
    PA
    Yes. They will work with FI
    Verbatim Via Ultimate SOHC regarding FI
    "..The Euro 1500 24/68 won't have sufficient overlap to cause huge issues, but the idle speed will need raising to around 950 rpm up from 850 to give acceptable smoothness..."
     
    Ryan59 likes this.
  8. nichol01

    nichol01 True Classic

    Location:
    pennsylvania
    Is this cam NOS or a used cam.

    Edit- Sorry I can read pretty good but it's my comprehension skills that need work.
     
    Last edited: Nov 25, 2018
  9. Eastep

    Eastep True Classic

    Location:
    PA
    Used.
    Description in posting
     
  10. Yves

    Yves True Classic

    Is that cam from performance view can be compare with D223 provide by our supplier without the issue of the base circle ?
     
  11. Eastep

    Eastep True Classic

    Location:
    PA
    There's no issues with base circle. These are stock camshaft. As for comparisons to aftermarket cams; IDK. I've provided the specs. What that equates to on a vendor's site is not if interest to me.
    Let me clarify, for anyone interested.
    These are OEM camshafts that were fitted stock to late model UK 1500 X1/9.
    There are only two real OE euro cams anyone should ever consider buying.
    P/N 4331512 as delivered on early 128/rally
    128 coupe / X1/9 1300 (75hp) 24/68 64/28 lift at the valve (no play) 9.75mm for intake / exhaust
    And/or
    P/N 4333059 as delivered on late carbureted 1500 X1/9 (85cv) 24/68 64 28 lift at the valve (no play) 9.85 inlet 9.90 exhaust
    Literally any other part numbers European specified or not, are going to be basically the same profile as we have here in the US. Some are 10/54 others are 12/52 .... None are with the time or expenses to buy and install.
     
    AKimball92 likes this.
  12. Yves

    Yves True Classic

    Sorry to be not clear about base circle ... I'm talking about D223 is a regrind cam and the side effect is small base circle not the one you offer.
     
  13. Eastep

    Eastep True Classic

    Location:
    PA
    Correct. thank you. These are NOT regrind or have a smaller base circle.
     
    Last edited: Nov 20, 2018
  14. nichol01

    nichol01 True Classic

    Location:
    pennsylvania
    Mike; Great talking with you about this cam the other day. Funds were transferred to your paypal. Can't wait to get it!
     
  15. artz1731

    artz1731 True Classic

    Location:
    Denver PA
    Sounds like we have a project for a PA shop day!
     
    Eastep, nichol01 and lanciahf like this.
  16. Eastep

    Eastep True Classic

    Location:
    PA
    It should be fun. I have plans as well. Jon and I are going to be quite busy in the coming months. Exciting times!
     
  17. artz1731

    artz1731 True Classic

    Location:
    Denver PA
    Keep me in the loop. I hate to say this but besides adding a relay for the starter I have nothing that needs worked on....knock on wood.
    I would be glad to help.
     
    Eastep and AKimball92 like this.
  18. Eastep

    Eastep True Classic

    Location:
    PA
    Sold out!
     
  19. nichol01

    nichol01 True Classic

    Location:
    pennsylvania
    I'm jealous!:)
     
    Last edited: Nov 26, 2018
  20. nichol01

    nichol01 True Classic

    Location:
    pennsylvania
    Recieved Euro camshaft. Looks real nice. Thanks Mike
    20181216_114304.jpg
     
    AKimball92 and Eastep like this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice