steve
steve tushup
Pete -- being very old, I only have long-term memory left. It occurred to me that way back in the 1980's, my Fiat mechanic (working on my '76 X1/9) told me that the radiator could be "bled" by filling the coolant; park on a downward slope (front lower than rear so middle of expansion tank is higher than top of radiator); leave the expansion tank cap off; run to full operating temperature for about 45 minutes to let all the air escape out of the expansion tank; put the cap back on and you're good to go.
I've never done it!
I don't know if it works.
Perhaps Bernice or Tony or Bob or one of the experts would care to comment.
Steve
I've never done it!
I don't know if it works.
Perhaps Bernice or Tony or Bob or one of the experts would care to comment.
Steve