puriportland
New Member
Hey Now,
I am in the process of replacing the 4 rubber bushings on the front stabilizer bar with the Monte Hospital urethane ones and curious how one replaces the the two front bushings. It appears the bushing are sandwiched between a top and bottom mount that appear to be welded or pressed together around the mounting holes. I am curious if others have just drilled this out and then mounted the two pieces back together without welding it back together. Any advice would be helpful before I drill it out.
Thanks,
Rob
I am in the process of replacing the 4 rubber bushings on the front stabilizer bar with the Monte Hospital urethane ones and curious how one replaces the the two front bushings. It appears the bushing are sandwiched between a top and bottom mount that appear to be welded or pressed together around the mounting holes. I am curious if others have just drilled this out and then mounted the two pieces back together without welding it back together. Any advice would be helpful before I drill it out.
Thanks,
Rob