fiatfactory
Steve Cecchele
A set of four X1/9 series 1 European style bumper blades and blocks, fair condition, suit someone handy at prepping and finishing to make them really good. No rusty holes, some surface rust on inside faces, some minor damage that would be a straightforward repair.
Rears have been painted somewhere along the line, gloss black over the over riders too...the left rear has had a small repair as can be seen in the pics, I guess when you blast the paint off you'll find a little filler in there... any rust you can see is minimal depth, and certainly doesn't go thru to the outside, I gave them a good scratching with the tip of a round file, and the metal is still thick. Rears are straight and in generally good condition.
Fronts are factory paint. LHF is a little damaged on top, it's broken the spot weld to the corner bracket as shown in the pics, and the blade has an ever so slight twist. RHF has had a tiny knock to the over rider, and has the smallest of bends towards that end, you can see that in the pictures.
All four blocks have minor blemishes, but would clean up with a little work.
More pictures available on request.
The four blades and blocks as per pictures below, $300au OBO plus postage at cost (from Australia)
left front
left front detail top
left front detail inside bracket
left front bracket detail
left front inside detail
left rear outside
left rear inside
left rear inside detail
Right front outside
right front inside
right rear outside
right rear inside
right rear inside detail
SteveC
Rears have been painted somewhere along the line, gloss black over the over riders too...the left rear has had a small repair as can be seen in the pics, I guess when you blast the paint off you'll find a little filler in there... any rust you can see is minimal depth, and certainly doesn't go thru to the outside, I gave them a good scratching with the tip of a round file, and the metal is still thick. Rears are straight and in generally good condition.
Fronts are factory paint. LHF is a little damaged on top, it's broken the spot weld to the corner bracket as shown in the pics, and the blade has an ever so slight twist. RHF has had a tiny knock to the over rider, and has the smallest of bends towards that end, you can see that in the pictures.
All four blocks have minor blemishes, but would clean up with a little work.
More pictures available on request.
The four blades and blocks as per pictures below, $300au OBO plus postage at cost (from Australia)
left front
left front detail top
left front detail inside bracket
left front bracket detail
left front inside detail
left rear outside
left rear inside
left rear inside detail
Right front outside
right front inside
right rear outside
right rear inside
right rear inside detail
SteveC
Last edited:
