Craig78
Low Mileage
The following is how I made the mounting board for the front trunk of my 1978 X.
I started with a 12 x 12 inch sheet of acrylic
I then made a cardboard pattern and used a piece of coat hanger for its profile
Clamped the acrylic between the table and a true piece of oak. Used heat gun to warm acrylic until it would bend
this is where the coat hanger helps
The final shape
Used threaded rivets to mount to car frame
Mounted in place
Here you can see mounting holes
and the final product
I started with a 12 x 12 inch sheet of acrylic
I then made a cardboard pattern and used a piece of coat hanger for its profile
Clamped the acrylic between the table and a true piece of oak. Used heat gun to warm acrylic until it would bend
this is where the coat hanger helps
The final shape
Used threaded rivets to mount to car frame
Mounted in place
Here you can see mounting holes
and the final product