My headlights are pointing too high, I am getting angry flashing from oncoming cars.
Trying to adjust them I am having two problems:
1. what head size is that adjustment screw?
2. which way I need to turn it to lower my beam?
Thanks.
The X19's lights are already close to the ground so I get all I can by adjusting on the low beam and fine tune from there. Either way will work. I move the right hand light over a fraction to the right to give a little more road side illumination. Those of you that drive on the wrong side of the road it would be the left headlight.8mm, or 5/16" nut driver works. I would adjust mine aimed at a wall at night. Actually, you want to aim the headlights with the brights on so the bright spot is straight ahead, then the lowbeam should be about right, but you can fine-tune it.
..... Those of you that drive on the wrong side of the road.....
.....that would have to be YOU guys!!!
cheers, Ian - NZ
Yes. Reach through the access opening behind the pods with a nut driver for the up/down adjustment. Reach in with a wrench through the access port on the inboard side of the pod for the left/right adjustment.is it possible to adjust them with the pods up? I messed with mine a while back and already forgot the details just remember trying to turn the adjuster was a PITA,
Do ya think you could arrange it so we can use your MOT Test Station's alignment machine?
I'll buy the Coffee and Donuts... or would Tea and Crumpets be more appropriate?