geekdaddy
X1/9 Learner's Permit...
Just for yucks, I'm following Dan's lead and will modify my levers to include tritium vials so they're always illuminated. It's been WAY too cold outside to do serious work on my X so goofing off with indoor projects.
A few of my levers are cracked/broken from removing them the first time. They still work but are very loose. Mine is an 81 without AC so it uses the stubby "two-sided" variants with squarish-ends. They look like the ones in this post from Jeff (except no wires or drilled-holes in the originals): http://xwebforums.org/showpost.php?p=164163&postcount=1
BTW anyone who wants to remove their levers without breaking them? Make sure it's warm outside or gently warm them to minimize breakage. I use a harbor freight hooked pick to catch them from the rear and gently pry them open off each side of the lever. Using this approach I can remove them without breaking them. You can too
Looking for ~2 lever knobs in good condition please let me know if you have them and what your asking price is. Thanks!
A few of my levers are cracked/broken from removing them the first time. They still work but are very loose. Mine is an 81 without AC so it uses the stubby "two-sided" variants with squarish-ends. They look like the ones in this post from Jeff (except no wires or drilled-holes in the originals): http://xwebforums.org/showpost.php?p=164163&postcount=1
BTW anyone who wants to remove their levers without breaking them? Make sure it's warm outside or gently warm them to minimize breakage. I use a harbor freight hooked pick to catch them from the rear and gently pry them open off each side of the lever. Using this approach I can remove them without breaking them. You can too
Looking for ~2 lever knobs in good condition please let me know if you have them and what your asking price is. Thanks!