As of now I need the following for a 75' 128 2dr sedan;
1) rear view mirror
2) "1300" that goes back in the trunk
3) reverse light assembly
4) lower dash tray/console pass side moulding
5) front struts upper bushings
I'm pretty sure I have #1 & #4, will check in storage tomorrow. :wink2:
As of now I need the following for a 75' 128 2dr sedan;
1) rear view mirror
2) "1300" that goes back in the trunk
3) reverse light assembly
4) lower dash tray/console pass side moulding
5) front struts upper bushings
Lmk if im lucky and you have it.....thanks
Sorry, don't have either item. The r/v mirror I had was broken & the dash tray didn't have any front moulding on it (already removed).
1) rear view mirror
********* Inside, I have a used one http://www.fiatplus.com/rear-view-mirror-pr-292865.html
outside http://www.fiatplus.com/screw-on-outside-mirror-pr-281244.html ****
3) reverse light assembly******** http://www.fiatplus.com/back-up-lamp-assembly-pr-297722.html ******
5) front struts upper bushings******** Original http://www.fiatplus.com/strut-top-fiber-washer-pr-286753.html
Plaia bearing style http://www.fiatplus.com/front-steering-pivots-bearing-pr-277241.html
Chris Obert ******
Hi Chris,finally getting into this and wanted to know if you have the front struts upper mounts for a 75 128 as well.Checked your website and it only shows used ones so wanted to double check.
Also on the reverse light,this is the whole assembly right? not just the lens.....thanks