Jeff Stich
True Classic
A few Fiat X1/9 items that I have no use for, hopefully someone here will? :italia:
#3. New old stock original Carello right (passenger side) front turn lamp assembly for 1974-75 Fiat X1/9 Bertone automobiles. USA-type lens has deep amber (orange) color with no cracks. Perfect condition, but a little dirty from decades of storage. This is a complete NOS lamp assembly, still in the original Fiat packaging, part #4294978.
$75 + insured USPS Parcel Post (or Priority Flat Rate, whichever's cheaper) shipping from 92860.
#4. Used upper cambox engine mounting brackets for 1974-78 Fiat X1/9 (1300cc engine). This bracket mounts to the inboard end of the camshaft housing (above the thermostat assembly), & one end of the top "dogbone" engine-stabilizer bar bolts into the open end of this bracket. These brackets came off of X1/9 cylinder heads that I've salvaged for use on my Fiat 128 - the 128 uses a different top bracket than the X1/9, so I don't need these.
$5/each + cheap USPS shipping from 92860.
#5. Late-model Bertone X1/9 targa-bar vent "BERTONE" script alloy emblems/plastic grilles. Set of 3 grilles (2 driver-side & 1 passenger-side) & 4 emblems. Used condition with some paint overspray, all rear mounting studs are intact on all 4 emblems.
$10/all + cheap USPS shipping from 92860.
#3. New old stock original Carello right (passenger side) front turn lamp assembly for 1974-75 Fiat X1/9 Bertone automobiles. USA-type lens has deep amber (orange) color with no cracks. Perfect condition, but a little dirty from decades of storage. This is a complete NOS lamp assembly, still in the original Fiat packaging, part #4294978.
$75 + insured USPS Parcel Post (or Priority Flat Rate, whichever's cheaper) shipping from 92860.
#4. Used upper cambox engine mounting brackets for 1974-78 Fiat X1/9 (1300cc engine). This bracket mounts to the inboard end of the camshaft housing (above the thermostat assembly), & one end of the top "dogbone" engine-stabilizer bar bolts into the open end of this bracket. These brackets came off of X1/9 cylinder heads that I've salvaged for use on my Fiat 128 - the 128 uses a different top bracket than the X1/9, so I don't need these.
$5/each + cheap USPS shipping from 92860.
#5. Late-model Bertone X1/9 targa-bar vent "BERTONE" script alloy emblems/plastic grilles. Set of 3 grilles (2 driver-side & 1 passenger-side) & 4 emblems. Used condition with some paint overspray, all rear mounting studs are intact on all 4 emblems.
$10/all + cheap USPS shipping from 92860.
Last edited:
