My latest mod - Booties!!

[Mark Plaia]

We have entered rainy season here in the Pacific Northwest. The down side of running the full coilover setup that I do is that the strut rod and consequently the upper strut seal are exposed to the elements. I did some research and found coilover covers made by Kirkey, the folks who make the aluminum seats. Here are before and after photos:

Ciao,

 

[Black-Tooth]

Nice "outfit"... does it come with a little rain-hat and rubbers too???

HAHAHAHA...

On a serious note... can they be installed "around the springs"... or do you have to remove them and slide them over the top?

What a find Mark... you never cease to amaze me!

 

[Mark Plaia]

The top of the boot has a hole in it......

and the side skirts have hook-n-loop closures. They are too long, but I just folded the excess up inside.

The top end of the strut does have to be disassembled. I had to cut the top hole slightly larger so that it fits snug around lower cone and is not pinched by the rubber of the top mount.

Ciao,

 

[Rupunzell]

X golushes?

Nice find Mark, Guess it's part of life in the Pacific Northwest .

 

[Black-Tooth]

Well, that'll work... I wonder about "trapped moisture"...

... especially up in your area. I guess time will tell..