those are them
Chris,,
I did have to remove the stock sliders to make them fit. I tried making some risers out of square steel tube, but that made them too high. So, unfortunately I had to grind and cut the old sliders out. But that is ok. I did not really care for the original seats and these are pretty comfy, but still a little too big. If my memory is right, the Sparco Steel series seats are a tad smaller on some of the dimensions. I will eventually get the Steels and put these in my Jeep. I also want to pick up the Sparco 3 point double harness belts but trying to figure out the best way to mount them, if I can use the stock seatbelt holes or if I will have to fabricate a new mount for them.