getting closer
So i have connected the wires as you described and things are almost all working just a few loose wires to finish up.
1 so there is no white/red wire to speak of where does the wht/red wire go to/come from
I have a yellow/black wire coming from the dimmer thumb dial currently no attached to anything. Not sure where it goes?
2 I have a grayish/brown wire coming from under the dash (drivers side) currently not attached to anything? Not sure where that goes?
3 I have a double red one smaller than the other. Both going in the center hump and then to the fuze box (I think) Not sure where that goes?
4 I have a double black wire not attached to anything. one wire goes to the dimmer thumb dial and the other to the (I think) fuze box.
5 I have not connected any thing the aux switch the one with the three dots on it.
Now the things that still don't work are
no dash lights come on at all
The dome light does not come on when the doors open but the buzzer does come on when the key is in.
the turn signals work only with the front turn lights are not plugged in
but hazards still don't work
THE GOOD
in the dash the lights indicator works
brights indicator works
the voltage gage works
brake lights work
headlights work
side markers work
tail lights work
reverse lights work
wipers work (one speed only)
dome light works with switch
lights go up and down