Offset suggestions....

[petex19]

Help with offset....
I'm considering a set of Revolution wheels and was curious as to what offset members are installing on their X's staying within stock fenders and the tire sizes they were able to fit in both front and back or the ET # as it is commonly referred to as. I am already running coilovers so I do have plenty of clearance room but wanted to try 15x7's rear and 15x6 fronts keeping the wheels within the stock fenders but just barely. I was thinking of running 195/50/15 (fronts) and 215/45/15 (rears) Toyo proxes.....


'PeteX1/9

 

[bikesandcars]

you can buy the 1.25" 4x100 adapters and use 30-40 mm offset wheels from any vw/honda/japanese import

for those revolutions I think 10-15 mm works without adapters.

 

[Black-Tooth]

Hey Pete... I would think that with those tires...

... a 7 and 8 inch wide rim would be recommended... and would also probably have NO problem clearing both the springs and the wheel opening on the fenders.

Depending on offset, may even protrude a bit, but would most certainly clear given the overall diameter.

I speak from what experience I've had with SIMILAR tires and the various CALCULATORS... You'll need to make SURE for yourself.

Good luck and send FOTOS!