Search wide rims

Diabolic

Diabolic

True Classic
Hello friends

Seeking wide steel rims for my Diabolic GTS stradale.
Such as on the U.S. cars are fitted.

Hole circle: 4x98 for Fiat.
Width: 9.0 inches
Height: 14 or 15 inches
Offset : 0 - 10
Color: chrome or black

I have seen at Summit-Racing for but the only rims for U.S. cars.
Who can help me further?

Thanks, Kind regards

Raffi
 
best advice is to buy a set of US spec steelies, then take them to a professional wheel shop and have them widen them. They will cut the wheels into 2 pieces then they will weld in a new section of "barrel" to the specs you provide. You can do this yourself, but the chances of the wheel being off balance are greater.
 
Someone was trying to sell that set up on eBay...

...just last week. Stock steel wheels that were widened for a Dallara kit. I though someone had posted a link here, so it may be lingering in our current archives.
 
Steel Wheels

Bolt Circle 4 X 98 mm or 4 X 3.86 inches
Wheels Width 8.0 and 9.0 inches
Wheels Diameter 14.0 or 15.0 inches
Hub 58 mm or 2.28 inches

Wheels in this.......

crr-3975860_w.jpg


crr-3655712_w.jpg


crr-342-5160.jpg
 
Last edited:
My friend had them

on the 2.2 turbo X
billspics71308099-1.jpg

also he was running racing slicks had no problem with using nonhub-centric wheels just make sure you use tapered lug bolts the factory steel wheel lug bolts work fine and torque them to the correct specs I think he was torquing theme at 70 ft lbs.On the 2.2 turbo car studs and blots with the correct taper ware used.any good tire tech will be able to balance them no problem.
 
But those come with tires!

maybe could be a good deal if you check prices on tires and wheels on same measures

These are one-offs, none other like them anywhere in the world!
Great For Your Custom Fiat Showcar!
Gloss Black Powdered Coated Steel!
Standard Rear Offset!
Fronts are 9" Wide 215/50/13 BF Goodrich T/A Radials!
Rears are 11" Wide 235/50/13 BF Goodrich T/A Radials!
Fiat Center Caps, not shown, also included!

Or ask to cozzoi here in the forum he run 15" steel wheels with 205-50-15 on his beauty MARTINI RACE X1/9

img6637r.jpg


my 2 cents

extrasmallrbrbadgezv7.jpg

Ricardo
X19/79
www.trazia.com/x19
 
Last edited:
email the

Question to me at
b.discher at yahoo.com
to see if I receive it . I will than email it to Diamond for you.
 
Raffi Matt at Midwest Bayless

has this Dallara kit X from Jason Greenwood last I knew...

Wheels are from Spinwerkes http://spinwerkes.com/

Extensive research this is the exact wheels needed for that kit. Not sure about fitting for your flares though...

WHEELS DIAMETER = 15"WHEEL WIDTH = Front 2 X 7" 195/50 (slight rub at lock), Rear 2 X 8" 205/50
C'SINK ANGLE = 60 degrees
BOLT CIRCLE DIA = 4x98mm
DIAMETER OF STUD = 12mm
LENGTH OF STUD FROM FACE OF HUB = 35 - 50mm (variable)
BACKSPACE TO INNER FLANGE = 80mm
HUB PAD DIAMTER = 58mm or greater (58mm is hub-centric fit)

FORWARD PROTUSION OF BRAKE CALIPER = 7mm
DISTANCE FROM HUB CENTER TO THE BEGINNING OF THE CALIPER = 6mm
DISTANCE FROM HUB CENTER TO THE END OF THE CALIPER = 134mm
 
Circle Racing wheels

same deal as with the Diamond call them and tell them your needs and they will make a wheel to fit your needs.

http://circleracing.com/shopsite_sc/store/html/27_15in.html

27-570545100.jpg


what will the car be used for street, show, road racing ,hill climb?

what tires are you going to use for the car street,road racing ?

what is the total tire height and width you are trying to fit on the front and rear off the car?
 
well on

Matt's road race cars he uses Circle racing wheels 13x7. On the black car with the wide body kit on it he is using Circle wheels also you can see the sticker right on the wheel in the picture.so unless thy have changed the wheel since the pic was taken those are Circle wheels.
 
You must log in or register to reply here.
Back
Top