SOLD: Vick Autosport aluminum radiator

[ng_randolph]

Bought in July 2015, but never installed. This is not the earlier "Texas Heat" model, but the later, more economical unit. Studs on the back for the stock fans, studs on the front for the stock A/C condenser. Bleed screw, drain screw and thermo-switch bung in stock locations. As you can see in the first photo, the bleed screw bung is canted quite a bit. I see no marks or imprints on the shipping box or the styrofoam padding, so I believe the radiator came from the manufacturer this way.

I paid $225, yours for $80 + shipping from 95131. Packaged, it weighs 17.8 lb and the box is 8" x 15" x 33".

 

[Hybridfiat]

What's the length and height of a standard radiator?
I'm 1000kms from home at the moment and trying to source one on the net.
I'd appreciate the help.

 

[Kent Baird]

Message sent. I could use it. Kent

 

[tonyism7]

If any of the posters above me fall through, I call dibs.

 

[bjwhite]

I’ll take it if Kent doesn’t end up doing so.

 

[ng_randolph]

Message sent. I could use it. Kent

Message replied to.

 

[ng_randolph]

The radiator is now sold.

 

[Tavalin]

As normal... late. My radiator need some serious attention. It currently has a small leak.
Oh well... next time.
Mike

 

[Chris Obert]

From the trenches:
After a few years of service these radiators will leak from the welded seams. See my previous posts on this subject.
Keep your original radiator, you will eventually need it.