From what I understand (very little), the stock X trannys are good up to about 120hp. I'm assuming roughly 100 ft lb torque.
Since I have 2 spare motors and 2 spare trannys (5 spd), I need to come up with a plan to build a reliable trans that will see about 175 ft-lb torque and about the same in HP. Can this accomplished? How? I'm not afaid to spend some money, but I won't spend thousands. (I'll do a 4AGE swap first)
Tranny will be matted to a home brew turbo engine (1500cc). Specs have yet to be determined. However I have 175hp in mind. I think this should be pretty attainable and hopefully reliable.
Since I have 2 spare motors and 2 spare trannys (5 spd), I need to come up with a plan to build a reliable trans that will see about 175 ft-lb torque and about the same in HP. Can this accomplished? How? I'm not afaid to spend some money, but I won't spend thousands. (I'll do a 4AGE swap first)
Tranny will be matted to a home brew turbo engine (1500cc). Specs have yet to be determined. However I have 175hp in mind. I think this should be pretty attainable and hopefully reliable.