wanted a.c. parts
- Thread starter 85x1/9
- Start date
jjay911
True Classic
I am in the slow and careful process of removing the AC system out of a late X. If you are patient I will have it done in about 6 weeks
I want to make sure I dont damage anything and make it as nice and salvageable as possible.
LarryC
Curator of #10105275
Wyatt, the main items you will need are
Items you will need from the donor
Heater-Evaporator box
AC -Heater Control panel
Compressor-Alternator mounting brackets
Items that can be acquired off the shelf or used but you will need
Condenser fan switch and High Pressure switch
Low Pressure Switch, switch block and hard line
Frost prevent valve and hard line
Universal items that would be replaced with off-the-shelf new items:
Compressor (SD7H15)
Condenser
Drier
Expansion valve
134a hoses
fittings
Items you will need from the donor
Heater-Evaporator box
AC -Heater Control panel
Compressor-Alternator mounting brackets
Items that can be acquired off the shelf or used but you will need
Condenser fan switch and High Pressure switch
Low Pressure Switch, switch block and hard line
Frost prevent valve and hard line
Universal items that would be replaced with off-the-shelf new items:
Compressor (SD7H15)
Condenser
Drier
Expansion valve
134a hoses
fittings
calabronebertone
True Classic
Found post on Craigslist (NOT MINE)
http://houston.craigslist.org/pts/3994442338.html
qrppc-3994442338*sale.craigslist.org Posted: 2013-08-11, 4:58AM CDT
FIAT X1/9 BERTONE A/C SYSTEM PARTS - $400 (WAYSIDE AND I-10)
I HAVE THE MAIN CONTROL BOX WITH EVAPORATOR CORE AND HEATER CORE.
IT FITS UNDER THE DASH.
I HAVE ALL HOSES,
CABLES,
VACUUM ACTUATORS,
ACCUMULATOR / DRYER,
FROST PREVENTER,
EVAPORATOR CORE,
HEATER CORE,
HIGH SIDE AND LOW SIDE PRESSURE SWITCHES,
EXPANSION VALVE,
CABLES AND DRAIN HOSES.
ALL IN GOOD USABLE CONDITION.
THE A/C COMPRESSOR, CONDENSER AND A NICE X1/9 BERTONE TO PUT IT ON ARE THE ONLY PARTS MISSING FOR COLD AIR.
400 FOR ALL OR BEST OFFER
CONTACT ME ANYTIME,
832 35I O286
THANKS
Posted: 2013-08-11, 4:58AM CDT
Updated: 2013-09-05, 2:19PM CDT
http://houston.craigslist.org/pts/3994442338.html
qrppc-3994442338*sale.craigslist.org Posted: 2013-08-11, 4:58AM CDT
FIAT X1/9 BERTONE A/C SYSTEM PARTS - $400 (WAYSIDE AND I-10)
I HAVE THE MAIN CONTROL BOX WITH EVAPORATOR CORE AND HEATER CORE.
IT FITS UNDER THE DASH.
I HAVE ALL HOSES,
CABLES,
VACUUM ACTUATORS,
ACCUMULATOR / DRYER,
FROST PREVENTER,
EVAPORATOR CORE,
HEATER CORE,
HIGH SIDE AND LOW SIDE PRESSURE SWITCHES,
EXPANSION VALVE,
CABLES AND DRAIN HOSES.
ALL IN GOOD USABLE CONDITION.
THE A/C COMPRESSOR, CONDENSER AND A NICE X1/9 BERTONE TO PUT IT ON ARE THE ONLY PARTS MISSING FOR COLD AIR.
400 FOR ALL OR BEST OFFER
CONTACT ME ANYTIME,
832 35I O286
THANKS
- Location: WAYSIDE AND I-10
Posted: 2013-08-11, 4:58AM CDT
Updated: 2013-09-05, 2:19PM CDT
jjay911
True Classic
OK I just parted out a Bertone with AC and I was successful in removing the entire system completely...
Question is If I sell the system is it best for the buyer to buy their own Compressor or do I pack it all up in two boxes and sell complete...
Not sure on a price but If I was to charge the hourly rate for removal it would be expensive.
I will post up some pics later... Jeff
Question is If I sell the system is it best for the buyer to buy their own Compressor or do I pack it all up in two boxes and sell complete...
Not sure on a price but If I was to charge the hourly rate for removal it would be expensive.
I will post up some pics later... Jeff
Last edited:
Ellychiprout
1986 Time Traveler X
If the buyer intends to put on a new compressor, he or she will still need the rear head of your old compressor, because modern Sanden 508 compressors have different suction and discharge fittings. It is a very easy swap, and the buyer will be able to maintain originality, and use the hoses that connect to the compressor, without modifications.